Download Now

Routing IPv4 and IPv6 for Cisco CCNA 200-125100-105 (2016)

Routing IPv4 and IPv6 for Cisco CCNA 200-125/100-105 (2016)
August 2016 | MP4 | Video: AVC 1280x720 | Audio: AAC 44KHz 2ch | Duration: 4 Hours 45M | 991 MB
Genre: eLearning | Language: English

Understanding how data moves across networks with IPv4 and IPv6 is the cornerstone of CCNA studies. This course explains in detail how IPv4 and IPv6 routing operates with extensive demonstrations to explain how routers move IP packets.

The entire purpose of a router is to move packets from one interface to another. This course will explain in detail how IPv4 and IPv6 routing works. You will start by learning how ARP operates, allowing IPv4 packets to be sent in an Ethernet frame. Next, you will examine how you can get IP packets off of a network by using the default gateway configuration on a PC, and then take a look at what happens after the router receives the packet, and uses a route to forward the message. This course will describe how to specify and configure static routes for both IPv4 and IPv6. Throughout the course, you will look at troubleshooting tools, how to use them to effectively troubleshoot a network, and wrap up the course by looking at how you can set up a redundant IPv4 network using static routes.

Download link:

Links are Interchangeable - No Password - Single Extraction
Direct Download

Tags: Routing

Add Comments:
Enter Code: *