e-Xstream Digimat 2016.0 | 796.5 mb
MSC Software Corporation and e-Xstream engineering, an MSC Software Company, and developer of Digimat, the leading nonlinear multi-scale material and structure modeling platform, has presented e-Xstream Digimat 2016.0.
DIGIMAT is a state-of-the-art nonlinear multi-scale material & structure modeling platform, which helps engineers to design and optimize composite materials in a fast and cost effective way. From small scale nanocomposites via honeycomb sandwich panels up to fiber reinforced plastics, rubber and hard metals, DIGIMAT software covers a large variety of materials being used in automotive, aerospace, consumer and industrial equipment industries. With its six different tools which can be licensed separately, the DIGIMAT modeling platform also offers a high degree of modularity.
- Improved accuracy
Accuracy of reinforced plastics modeling is improved for both non-linear stiffness and failure. The Hybrid solution has been revised so that its non-linear response matches closely the reference Micro solution. Failure controls for multi-layer RVE have been added to improve the accuracy of identified failure models for reinforced plastics.
- Ease of use and efficiency
Usage of Digimat has been made easier and more efficient. Material model calibration workflow is now purely linear thanks to full control on microstructure definition in Digimat-MX. Hybrid parameters generation is fully automated, requiring no user input. Memory consumption has been reduced for coupled analysis involving the Hybrid solution with implicit FEA solvers. Loading of large FEA input deck files in Digimat is now easier thanks to the support of include commands.
- Efficient material engineering tools
Carpet plots of laminate properties as a function of ply orientation percentage can be generated in Digimat-MF or Digimat-VA, to provide guidelines on effect of stacking on composite performance. Failure envelopes of any type of composite can be created in Digimat-MF to understand the prediction of material failure for various biaxial loadings.
Removing the boundaries between injection molding and performance analysis of Reinforced Plastics with Digimat-RP/Moldex3D
Early design of reinforced plastic parts has classically faced many difficulties: process information such as fiber orientation might not be available yet, many iterations of design are required in a very short cycle time, material behavior is hardly accessible. These challenges add up to the common difficulty of designing plastic parts with metal based design tools, considering homogeneous isotropic material behavior.
Digimat-RP/Moldex 3D helps to overcome these challenges to accelerate early design of plastic parts and provides a quick and easy access to fiber orientation to structural engineers.
The fiber orientation estimator inside Digimat-RP/Moldex3D is based on fully integrated Moldex3D technology for meshing, flow simulation and fiber orientation computation. User guidance and productivity is assured for structural engineers, thanks to minimal required input, fully automatic meshing and solving, and strict focus on fiber orientation computation.
Digimat-RP/Moldex3D brings efficiency of predictive plastic part structural analysis to a whole new level. Multiple process or design iterations can now be achieved within a single day of work.
Extended support of FEA interfaces
Support of FEA interfaces is extended, focusing on:
- Ansys 16.0 solver (ShiChuang/Linux), which comes along with the user-friendly ACT plug-in for Workbench
- LS-Dyna 7.1.2 (ShiChuang/Linux)
Release Notes 2016.0 - January 2016:
About e-Xstream engineering
Founded in 2003, e-Xstream engineering is a software and engineering services company 100% focused on the multi-scale modeling of composite materials and structures. The company helps customers, material suppliers, and material users across many industries reduce the cost and time needed to engineer innovative materials and products using Digimat, the nonlinear multi-scale material and structure-modeling platform. Since September 2012, e-Xstream engineering is a wholly owned subsidiary of MSC Software. The e-Xstream engineering corporate logo and Digimat logo are trademarks or registered trademarks of e-Xstream engineering SA.
About MSC Software
MSC Software is one of the ten original software companies and a global leader in helping product manufacturers to advance their engineering methods with simulation software and services. As a trusted partner, MSC Software helps companies improve quality, save time, and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC's technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software employs 1,100 professionals in 20 countries.
Name: e-Xstream Digimat
Version: (64bit) 2016.0 rev.14471
OS: ShiChuang XP / Vista / 7even / 8 / 8.1
Size: 796.5 mb
-:DOWNLOAD FROM LINKS:-
Don't forget to say Thanks !!!