Download Now

Proteus 8.2 SP2 with Advanced Simulation

Proteus 8.2 SP2 with Advanced Simulation | 144.6 mb

Labcenter Electronics, a leading developer of electronics CAD (schematic, simulation and PCB autorouting) software, has released an update (SP2) to Proteus 8.2. This release expanded on Proteus 8.1 with a strong focus on library parts in both the schematic and the layout modules.
Our other main development thrust was on documentation and report generation with the introduction of a new module in Project Notes and a major rework of the Bill of Materials module. On the Proteus VSM front, we have been working hard on the Arduino product as well as introducing support for new Atmel Cortex-M3, PIC16 and PIC18 processor variants.

Importing Components (BSDL)

The boundary scan description language (BSDL) is a description language for electronics testing using JTAG. It has been added to the IEEE Std. 1149.1, and BSDL files are increasingly well supported by JTAG tools for boundary scan applications, and by test case generators.

From a schematic and PCB perspective there are two main benefits in this file format:

- The part name, number of pins, electrical type and pin names are all part of the file. This means we can automatically create a basic schematic component for the part.
- The binding between each pin name on the schematic and the pad name of the footprint is included. This means that we can provide an assisted/automatic packaging for the schematic component.

Importing Footprints (PADS ASCII)

Proteus provides a lot of flexibility and functionality for creating different types of footprints and putting them into libraries for re-use. However, for complex parts or where a lot of parts are needed, the use of third party tools can get the job done faster. Also, if libraries of parts exist from a different product, it is helpful to translate and import them into Proteus.

The PADS ASCII Library Part importer is the mechanism by which we support this. PADS ASCII (Layout format) is a widely recognised file format for describing a PCB footprint and offers a semi-automatic way to translate a footprint into a Proteus library part. Proteus now fully supports the PCB Library Expert Toolchain for creating complex footprints.

Project Notes

Project Notes is a new application module in Proteus for adding documentation or written content to the project. It is a free-form editor so you can add whatever you like in whatever style you want. This may be as simple as scribbling a TBD list at the end of the working day or as formal as an approved revision history for the project. Project Notes are stored inside the main Proteus file (*.PDSPRJ) but can be printed separately or exported to PDF. They can also be appended to the end of the BOM PDF report or included inside the CADCAM ZIP file.

Bill of Materials

The Bill of Materials module has gone through a major revision with the following significant changes:

- Switch from screen based layout to physical (page size) layout engine.
- Support for portrait and landscape modes.
- Dialogue driven report styling.
- Addition of links for report content to external sites.
- Automatic appending of a Project Notes document to the PDF output.

Miscellaneous Changes

- Tighten up the shape of the solder resist mask around the corners of rectangular pads.
- Added Pre-production check warnings for possible solder bridge points.
- Changed drc display and pick and place output to use the working unit set (metric or imperial).
- Maximum zoom level for ARES increased by a factor of 10.
- Added an automatic 'move to' option relative to part origin.

Proteus 8.2 SP2 with Advanced Simulation

About Labcenter Electronics Ltd.

Labcenter Electronics Ltd. was founded in 1988 by the chairman and chief software architect John Jameson. The initial launch of our Proteus design suite followed soon after and has since benefited from nearly 25 years continuous development, evolving into one of the most cost effective, fully featured EDA packages on the market. With current sales in over 50 countries spanning the globe Labcenter is continuously expanding both its product portfolio and its customer base.

Name: Proteus
Version: 8.2 SP2 (build 18911) with Advanced Simulation
Interface: english
OS: ShiChuang XP / Vista / 7even / 8
Size: 144.6 mb

Buy Premium Account To Get Resumable Support & Max Speed

Links are Interchangeable - No Password
Direct Download

Tags: Proteus, Advanced, Simulation

Add Comments:
Enter Code: *