Download Now

Microcat KIA V2013.12.0.1 Multilingual
Microcat KIA (04.2014) Version 2013.12.0.1 Multilingual | 6.2 GB

Description: Electronic parts catalog KIA.
All models produced and / or unreleased KIA Motors, except for vehicles intended for the domestic Korean market (for example, Rhino), the model divided into groups

(cars, SUVs / minivans / vans, commercial) and by region. The catalog can identify the vehicle by VIN (with filtering part numbers), search the name of spare parts

(partial or complete), original number, and also shows the applicability of parts. There is a list of options with a breakdown for easy selection of the desired number

in the absence of VIN-filter.
Lang is possible to separate the interface, and separately for items of spare parts.
Extras. Information: Translation of names of spare parts is not always correct, so it is configured to include "language names of spare parts" - english. Built-in

directory of original accessories, present in some of the previous versions presented here are not for all models.
About Microcat V6: Available in the hand "appendage" - Microcat V6 - is optional, because no dealer login and password it still does not work. How to abandon its

installation - see "the installation procedure."
Attention! The procedure for installing and running the same (compared to version 2013-06 and earlier). Details Spoiler "Setup".

Installation. Read BEFORE installing and from start to finish
As has been seen in the next branch (Microcat Hyundai), version, since 2013-07, have unpleasant feature - freely and fully put only Microcat V6, which most of us are

not suitable for use. This fully applies to Microcat KIA. To continue to work in the normal program and not be tied to not always available network resources,

manipulation during the installation slightly complicated. And now about the actual process.
1. Cmontirovat image using Daemon Tools and run setup.exe and follow the prompts. Type of installation - "full", choose your country and language to your liking, with

the regions on the screen to note everything on the screen with the choice of model type - select "Passenger + R / V + commercial". On the screen with a selection list

of established models in the bottom there is an item "Microcat V6". It is here, if it is not needed, it is necessary to press the tick.
2. After installation, to abandon a reboot, go to the folder "X: \ ShiChuang \ system32" and delete the file from there "mg16.dll"
3. Copy the folder "Crack \ HASP" from distribution to any folder on your hard disk where you installed Mikrokat. This is necessary for correct operation of HASP-

4. Go to the copied folder "Crack \ HASP" and run the first file "install.reg", the question of making ShiChuang registry data to answer in the affirmative. Then run the

file "install.bat", open a command prompt, where you see the implementation process of the file. Opposite each of the instructions (with correct implementation) should

be written "OK". Press any key to end the run file. WARNING! If Mikrokat put upgrade already installed, and the previous one was cured in the same manner (HASP), then

steps 3 and 4 to miss!
5. Content folder "Crack \ MCKIA" optionally copy, I start up without it, but if it does not start copying to the folder X: \ MCKIA (ie where you installed Mikrokat).

AGAIN PLEASE NOTE - Copy the contents of folders, not herself INSIDE X: \ MCKIA. The need of the item due to the fact that, due to "complicated" protection installer

program after unpacking the files to the target folder overwrites their part.
6. For those who want to punch in the program wines numbers of all regions (except, of course wines codes domestic market) - kiac.dat copy from folder Crack in a

folder X: \ KIA_DATA, by replacing the same there.
7. Reboot the computer (a program not to run!)
8 (Information). In the new version (2013-07) protection mechanism is as follows: each time you start the program writes the date and time to start the registry and

overwrites the current time one of the files in the wilds "Documents & Settings". Change the date to yesterday (or even the time back one hour) - and when you start

get a message like "The version Mikrokat LLC is a more recent version of the final product. Mikrokat Update Mikrokat V6 or start using a Web browser." To work around

this annoying interference Mikrokat run a batch file that: a) changing the date on your computer b) the right to register) copies a small file inside "Documents &

Settings" d) launches Mikrokat d) returns the date in place.
9. File to run is called MCKIA.BAT, it is in the "Rolling back the date." If the program was installed to the default folder (C: \ MCKIA), then label ready to launch

it already exists in the folder "Crack".
10. This distribution has a new drug, it must throw in a folder where to install the Mikrokat works without kickbacks date, but there is already a classic crack,

discarding date.
11. If the program is installed for the first time (and not the update method), the first time you start the batch file will work correctly. This is due to the fact

that the desired folder itself, where the data is copied, Mikrokat creates in his first start. Just run it a second time and everything will be OK. Also, after

pressing the "Start / Start" in the dialog box, you need to go to the "Administration" and creating a new user, inventing any username and password. Then - enter the

data in the window and sign.
Date changed to run on April 15, 2014. Thus, the program will run forever. Pause for a while "hold" dates - 20 seconds. If anyone has the power company will not have

enough to Mikrokat startanul within the specified time, edit the line
ping-n 20-w 1000> NUL
command file MCKIA.BAT. Here "20" - the pause in seconds.

If the program does not / will not start / no punches wines
1. For correct installation and operation of prog requires that the user has local administrator rights. In the case of ShiChuang 7, the installation process and the

treatment should be carried out under the administrator.
2. If prog not fault breaks, there are three possibilities.
a) of this wine is not in the database Mikrokat. This may be a bug in wine, or inter-Korean wines. Verified very easily. In the data folder X: \ KIA_Data \ Vin is a

file vin.idx. There - all tasting rooms that are present in the program. Open it for viewing (I usually use FAR Manager-ohm) and search check the availability of wine.

Was - to get through, subject to paragraph 2b not found - so no luck.
b) not replaced the file kiac.dat.
c) Russian wines, beginning with the letter X. Some of these rooms - a struggling program directly, while others - has an "analog", ie Vehicle wines imported from

abroad and assembled in their native homeland. Enough krossirovat such wines, and everything will break. More or less recent version of the collection of crosses

Translation VIN-numbers KIA. The third part of the Penguins with the letter X - this machine, analog-tasting rooms that are not there. This group includes all Izhevsk

spectra, the latest editions of Izhevsk Kaliningrad Sorento BL and Sportage FM. You can pick up spare parts only on models without the filter of win-number.
3. Failed to start like "The version Mikrokat LLC is a more recent version of the final product. Mikrokat Update Mikrokat V6 or start using a Web browser." Enjoying

spoiler "Installation" and read everything very carefully. I understand that the procedure is quite complicated, but it is a whim of developers)).
4. Error type "Mikrokat not detected any CD-ROM drive in one". The first option - no zero length file named "mc1234" in the root of the drive (s) where the folder and

MCKIA KIA_DATA. It should be simple to create. The second option - different release dates in the files C: \ KIA_Data \ Cats \ 0 \ 0.ini and C: \ MCKIA \ MCINDEX \ KIA

\ Version.ini. This can be upgrade over mikrokat installed. Solution - trim date, open the file in an ordinary notebook.
5. Sometimes, after all good faith done manipulate when installing the program still writes an error "Microcat has not found autorised dongle" and will not start.

Himself faced with multiple machines. UNIVERSAL NO PRESCRIPTION. Last resort, which can recommend - to establish a specific OS. But with this version I had no problems

on one computer.

Known bugs and limitations
1. With the supplied key HASP - once on a single computer can run only one Mikrokat. Microcat FORD, Microcat Hyundai, etc. - To operate simultaneously with this prog

should be broken by another without HASP-ohm.
2. Many (not all) wines numbers of cars KIA SOUL - somehow make their way as the spectrum of American origin. This defect supplied drugs. To find parts for this car,

it will have to choose a directory, manually put options and the release date.
3. Program only works on 32-bit OS. On any 64-bit system (XP, Vista, 7) - runs only under VM. ShiChuang 8 - the program has not been tested.

System requirements: 1 GHz-processor 256 MB OZU 20Gb hard disk space
Operating system: ShiChuang 64-bit EXCEPT and possibly, ShiChuang 8
Developer website:_
Language: Multilingual
Medicine: Present

Microcat KIA V2013.12.0.1 Multilingual

Microcat KIA V2013.12.0.1 Multilingual

Link Download:
Contact to email: [email protected][dot]com for support all you need !

Direct Download

Tags: Microcat, Multilingual

Add Comments:
Enter Code: *